Page 1 of 1

Calling NORM-------

Posted: Sat Mar 31, 2012 8:10 pm
by Alan R
Hi matey---- did you give out some info a while ago re}---Changing the Bullet 4-wire generator wiring loom to give "battery voltage" style lighting instead of the direct AC/DC set-up ??  can you go through it again,please or tell me the thread title from previous ?? Cheers.

Calling NORM-------

Posted: Sat Mar 31, 2012 9:13 pm
by Norm

  Hi Alan,


        Here is the basic idea, how you do it is up to you. From the alternator up under the seat you will see the headlight A/C regulator These wires are red/yellow and orange. The other 2 wires from the alternator are purple. What you have to do is conect red/yellow to one purple and the orange to the other purple. That takes care of the charging wiring but I am not sure if the standard Indian rec/reg unit will handle the extra charging. I assume it would because there is plenty of earlier Enfields running around with the battery operated headlight and we never worry about fitting different rec/reg units to theseNow I have to go away and think about where you can hook the orange wire feeding the headlight to. I'll be back


Calling NORM-------

Posted: Sat Mar 31, 2012 9:43 pm
by Alan R
ok ARNIE, I await your return

Calling NORM-------

Posted: Sat Mar 31, 2012 9:53 pm
by Norm

 Hi Alan,


    Tink I have it. Red/yellow from from the A/C regulator piggyback onto the red/yellow from the D/C rec/reg unit which is heading to the ameter and I think that is it. I am not sure if the existing rec/reg is capable of handling the extra load but as it is the same unit fitted to Bullets with battery powered headlight I think it would be ok. Worth a try. I think the orange wire is now redundant


Calling NORM-------

Posted: Sat Mar 31, 2012 10:17 pm
by Alan R
Cheers matey !!! I O U a tinnie or two. If the Northern skies suddenly glow in the night you'll know I got it wrong LoL  !!

Calling NORM-------

Posted: Sun Apr 01, 2012 9:03 am
by Gwilly
Alan, dont forget the ac lighting had no earth, whole circuit is seperate from dc battery/earthing. therefore orange wire can know be utillised as earth back to the frame, fixed at ac regulator position. regulator being now defunct. regards gwilly

Calling NORM-------

Posted: Sun Apr 01, 2012 9:21 am
by Alan R
G'day(probally night ?) Norm-- Good Morning old bean Gwilli ---ah! there's a point. So, I remove and discard the AC regulator ( as there is now no need for it) and using its' bolt clamp the orange wire to the cross-frame where the regulator used to be ??   OK chaps----will give that a go thisavo. Hey!! ---- I'm just having a bacon sarny wiv tomato sauce an coffee. BELTCH !! (Sorry old chum--most unbecoming of me.)