Page 1 of 1
TRials handlebars
Posted: Thu Dec 20, 2012 2:23 pm
by nicknick109
Trial Handlebars.
Wish to fit the above bars to a standard 350 Bullet. Looking at the catalogue Mr.H advises that they will fit with standard cables. My question is do the cables follow the same routing or do they have to be re- routed or will it be obvious when fitting ?
Thanks any help.
Nick
TRials handlebars
Posted: Thu Dec 20, 2012 3:40 pm
by PeteF
TRials handlebars
Posted: Thu Dec 20, 2012 4:21 pm
by Alan R
Hello NICKNICK 109---------- here's mine fitted to a 2005 Classic 500-----they go straight on as advertised !! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-----------
TRials handlebars
Posted: Fri Dec 21, 2012 3:44 pm
by nicknick109
To Pete F and Alan R both answers real helpful so many thanks to both of you and seasons wishes to you both.
Nick
TRials handlebars
Posted: Sat Dec 22, 2012 12:55 pm
by Craig
Hi Folk's
I am a bit late in on this one, But Just to confirm... I have fitted these bars to Both 500's & Classic 350's & My still in use 98 STD 350... All Have Been straight swops With NO Real Problems at all.
And I Have Found them Very Comfy & Good in daily use....Recommended.
Regards To You all... Craig
TRials handlebars
Posted: Sat Dec 22, 2012 1:16 pm
by grunda 12
hi alan, have you got the part number for these bars i might put a pair on G13 atb paul.
TRials handlebars
Posted: Sat Dec 22, 2012 9:12 pm
by Alan R
Hi Paul------------93051 I think.... They list 2 types of braced bars, mine are the straight or "in-line" type whereas the others are bent back at the ends.