Page 1 of 1
thread on new interceptor sump plug
Posted: Mon Jul 11, 2022 9:53 am
by don
Someone has stripped the thread on a new 650 intecreptor. I want to put a hellicoil in there and use the current plug.
Any one know what the thread is?\
looks to be 12.7 mm across the thread of the plug
Re: thread on new interceptor sump plug
Posted: Mon Jul 11, 2022 10:31 am
by Daiwiskers
A lot of sump plugs use a spark plug thread
I'm not sure about the interceptor but 12.7mm is pretty close to a 14mm spark plug thread
I am sure someone will know for sure but that's where I would start
Hope this helps Dai
Re: thread on new interceptor sump plug
Posted: Tue Jul 12, 2022 4:08 pm
by Adrian
M14x1.25 is 14mm spark plug thread, so an easy size for which to get Heli-coil and other repairs kits. Tapping size drill for this is 12.5mm, so I suspect Dai is on the money.
If that IS the thread you need (just check your sump plug against a spark plug, some sump plugs have M14 x 1.5), I'd be tempted to get one of the "solid", i.e. non-spring type inserts. Both these and the Heli-coil kits use an oversize tap, M16x1.25 for their spark plug thread inserts.
A.