By 73a
#99831
I have year 2000 350 bullet , and I am my confused over the 2 position ignition switch when reading the schematic.

The drawing show one normally open contact in off position and one normally closed contact ?

My drawing shows red/ black wire to black is open circuit when the ignition switch is in the ON position, is this correct?

Your help would be appreciated, cheers ng
User avatar
By stinkwheel
#99832
73a wrote:
Wed Jan 26, 2022 9:40 pm
My drawing shows red/ black wire to black is open circuit when the ignition switch is in the ON position, is this correct?
Yes.

The black is an earth, the red/black is connected to the ignition coil. In the "Off" position, the spark is earthed to stop the engine.

Shop for accessories at Hitchcocks Motorcycles