Page 1 of 2

Rear wheel help 63 500 twin

Posted: Fri Aug 06, 2021 7:05 am
by mick charles
Hi all .new to this .have had a couple british enfields before.
Recently purchased a 63 500 sports twin. In bits .
Having trouble setting up the back wheel .everytime I put any tension on axle nuts the wheel just gets tight and can't turn it. Not sure if I am missing any bits( as the parts book doesn't show much and I can't find anything on line. Have just put in new spacer. But to me it seems like a spacer or washer is missing .on right side ).behind the sppedo drive. Pic enclosed .or if anybody has any pics to help me out .much appreciated. Stay safe .any info appreciated .cheers mick from Tasmania

Re: Rear wheel help 63 500 twin

Posted: Fri Aug 06, 2021 8:27 am
by vince
Hi, you need a spacer behind the speedo drive 40989 and there is a spacer on the other side 11203. Vince

Re: Rear wheel help 63 500 twin

Posted: Sat Aug 07, 2021 12:11 am
by mick charles
Hi Vince. And thankyou .will endeavour to find them .cheers mick.

Update

Posted: Wed Aug 11, 2021 9:37 am
by mick charles
Have ordered parts .hopefully can fire up and be on road soon. Seat almost done. Sort this rear wheel .couple little things .🤞. Ready to go.👍👍👍

Re: Rear wheel help 63 500 twin

Posted: Thu Sep 02, 2021 2:56 am
by mick charles
Hi received spacers today .thankyou.but no difference. With or without the one behind speedo drive .😠😔. Anyone in aus want to buy a frigging nightmare . Doing my head in. Cheers all.

Re: Rear wheel help 63 500 twin

Posted: Thu Sep 02, 2021 8:19 am
by Bullet Whisperer
Just a thought, but your speedometer drive looks like an Indian one and I seem to remember them having a very slightly different fit and spacing requirement, when used on rear wheels to their original British counterparts. Might be worth checking?

Re: Rear wheel help 63 500 twin

Posted: Thu Sep 02, 2021 10:33 am
by Adrian
I was surprised to see that the 500 MM still used the earlier half-width hub for the Sports version while the De Luxe got the later full-width hub. Was the Redditch factory using up the left-over parts from the earlier models?

https://www.hitchcocksmotorcycles.com/p ... pages/2804

A.

Re: Rear wheel help 63 500 twin

Posted: Thu Sep 02, 2021 10:12 pm
by mick charles
Hi guys .and thanks. Upon closer inspection. The speedo drive has markings which read .Harrison's steel drive. Would this be Indian?. Also I think the backing plate (brake) is an aftermarket. Poss Indian. I was sold this bike in good faith and told was all good .😔 have tried different size shims and spacers to no avail. Due to this bloody virus .we are experiencing lockdowns .and unfortunately unemployment .so parts will have to wait. Unfortunately. Thanks all for advice .cheers mick.

Re: Rear wheel help 63 500 twin

Posted: Fri Sep 03, 2021 12:54 pm
by Adrian
The Harrison's drive is one of (many) Indian after-market speedo drives . Those half-width hubs are also still available from India too.

A.

Re: Rear wheel help 63 500 twin

Posted: Sat Sep 04, 2021 6:38 am
by mick charles
Thanks Adrian. Think I'll be like someone else on here go back to Japanese. This enfield is doing my head in .cheers all