Page 1 of 1
2007 Electra X sprag clutch removal.
Posted: Sat Apr 10, 2021 2:33 pm
by Kentish Man
Here is my inner primary chaincase with the sprag clutch "hump" removed and welded. I can not disclose the tradesman who carried out the work, and get any more done. What a cracking job!
Re: 2007 Electra X sprag clutch removal.
Posted: Sun Apr 11, 2021 4:49 pm
by Adrian
Well that should keep the oil/ATF in and the rain out, but it could use a bit more tidying up, surely?
For those of us who don't mind drilling and tapping a trio of M8 blind holes in the chaincase mounting boss on the l/h crankcase (can be done with the engine in the frame) the inner case of the 350 Indian home market kick start 350 Electra (the TCI version not the very early CDI model) is a pretty good solution. Available without the gear shift hole for us right-foot shift converts, or with for those wanting to keep it left-foot shifting. Saves all that trimming/profiling/polishing afterwards- if you're bothered about that sort of thing, of course!
A.
Re: 2007 Electra X sprag clutch removal.
Posted: Mon Apr 12, 2021 4:27 pm
by Kentish Man
Hi Adrian, yes the chaincase will of course be cleaned up and polished.
Re: 2007 Electra X sprag clutch removal.
Posted: Mon Apr 12, 2021 7:32 pm
by Allanfox
Thanks for sharing, looks good!
Re: 2007 Electra X sprag clutch removal.
Posted: Mon Apr 12, 2021 8:03 pm
by Adrian
Kentish Man wrote: ↑Mon Apr 12, 2021 4:27 pm
Hi Adrian, yes the chaincase will of course be cleaned up and polished.
I look forward to seeing the result!
A.