Hitchcocks Forum

Posted: **Wed Sep 12, 2012 9:54 pm**

hi all
i have been having trouble with a miss fire at full revs for a long long time ,bike being 350 redditch bullet engine in a 250 crusader frame,the engine slopes forward quite alot and after reading on amal website about setting float heights there is a small artical on norton atlas settings bieng different as the carb is sloping forwards any comments please .

Posted: **Wed Sep 12, 2012 10:16 pm**

Hi Steve, I built a couple of such machines for racing, with the engines inclined as you describe, maybe I can help. Give me a bell if you like on 07909 740160 [if no answer might be out testing and will return missed call]. Paul.

Posted: **Thu Sep 13, 2012 8:19 am**

I had a problem with a monobloc which I traced to float height. Have a read; http://www.whfolk.co.uk/REOCHUMBER/Arti ... nobloc.htm