This Forum is now CLOSED use the link to get more details viewtopic.php?f=3&t=13924#p102587
By dalgrae
#91206
Hi ,in the process of replacing the headstock bearings on my 250 gt,my question is ,nothing shown in parts book that I can see,but is there any form of cover/rubber boot that goes over the numerous number of connections from the lighting switch to the harness,as everything is out in the open and subject to all the weather conditions including rain.

Regards. Colin
By Daiwiskers
#91207
Don't all the connections go in the headlight

I could be wrong Dai

EDIT you could always make up a cover from a bit of inner tube
By dalgrae
#91208
Hi on mine only the headlight and ammeter go into the headlight shell,the short lighting switch loom with its 9 wires will not reach the headlamp shell hole

Shop for accessories at Hitchcocks Motorcycles