- Tue Jun 30, 2020 2:02 pm
#91155
Afternoon
Hands up I need some help please.
I decided to carry out some maintenance yesterday, check primary chain and change oil, I found on removal of the primary case the stator has been replaced however the wiring grommet had not been installed and silicone used. So after removal of side case to access stator wiring I noticed the Wassell stator has four wires, two red, one green/yellow and other white/green, the Enfield wiring is two violet, one orange and one yellow, focusing tagging the red to violet I forgot to note which wire went to orange or yellow, any assistance would be much appreciated.
Hands up I need some help please.
I decided to carry out some maintenance yesterday, check primary chain and change oil, I found on removal of the primary case the stator has been replaced however the wiring grommet had not been installed and silicone used. So after removal of side case to access stator wiring I noticed the Wassell stator has four wires, two red, one green/yellow and other white/green, the Enfield wiring is two violet, one orange and one yellow, focusing tagging the red to violet I forgot to note which wire went to orange or yellow, any assistance would be much appreciated.