This Forum is now CLOSED use the link to get more details viewtopic.php?f=3&t=13924#p102587
By Breezin
#89862
I've just fitted a pair of Motone tank pads. They went on ok except for a 1 inch gap along the top edge on one side.
I've tried holding it down but it doesn't want to take, even though the tank was FULLY degreaser.
I'm thinking of using a drop of some sort of glue to seal it and keep water out, to avoid a rust trap on a relatively new machine.
Any ideas, comments or suggestions would be most gratefully received.

Shop for accessories at Hitchcocks Motorcycles