Page 1 of 1

carb help please

Posted: Fri Aug 17, 2012 7:45 pm
by wolf
hi guys, i want to put the carb on my 2008 electra x back to standard, as it came from the factory. at present its been rejetted to suit a non standrad exhaust. this was done before i bought the bike and im sure its not been done properly, so basicaly i want to go back to the original carb setup and will put the original exhaust that came with the bike back on. what size are the original jets please. many thanks. wolf.

carb help please

Posted: Sat Aug 18, 2012 12:00 am
by Dampking
Stock Electra X came with 115 mainjet and 15 pilot. But it's better if you have a bigger mainjet and needle raised, that is in last notch. Running it a bit richer than normal is good. Usually all these Lean Burn models run superb lean. A rich bike will always be cooler than a lean bike.

carb help please

Posted: Sat Aug 18, 2012 8:58 am
by wolf
thanks dampking thats great mate,cheers, wolf.

carb help please

Posted: Sat Aug 18, 2012 11:23 am
by Dampking
Anytime!:)