Page 1 of 1
Metric? Not all of it.
Posted: Thu Oct 31, 2019 4:17 pm
by PeteF
You'd have thought that a 2019 Classic would be all metric by now (well I would)
Not so. I just found out the rear suspension mounting bolts are 3/8 BSF.
Are RE STILL using up old stock??
Re: Metric? Not all of it.
Posted: Thu Oct 31, 2019 5:30 pm
by stinkwheel
Do they still have 3 sneaky M7 nuts on the alternator stator? That nearly precipitated a tantrum from me one weekend.
Re: Metric? Not all of it.
Posted: Fri Nov 01, 2019 9:27 pm
by Leon Novello
My 2000 Bullet had a lot of spanners which didn`t fit anything on the bike; I replaced them with metric from my own toolkit.
Re: Metric? Not all of it.
Posted: Fri Nov 01, 2019 10:54 pm
by Mann
My outer rear axle nut on my 2018 classic is a 15/16 inch spanner, the supposed 24mm spanner is way to loose and when i measured the nut on a micrometer it came up at 23.92mm