Forum

[Steve T]

Jefrs the part number is 91475 @£75.00 the front has a tongue on it that tucks under the bracket on the frame tube and
the rear is secured by two bolt/ nuts on the frame above the toolboxes very quick to fit. Steve

[jefrs]

Thanks Steve T.

the 2015 does have a front tongue bracket but also a larger middle bracket which may stop the seat sitting down. H's "will it fit" says it won't fit the C5 EFi. I kinda need to see under the current B5 seat to see what's what.

I have phoned H and basically been told to "watch this space". The C5 EFi is 'new' and they haven't developed seat fitting, yet.


Part of the problem is RE have changed the frame fitments about. I'm not so sure I have the rear bolt holes in all the right places.

Otoh I'm supposed to be an engineer and able to fabricate brackets.



The 2/3 Scrambles Seat (below 91475 on H site) should fit the 2015 but it looks thick and possibly higher than mine original. The dual seat was.

The other problem, negating the Scrambles, is I have to have a pillion seat even if wife never gets on the bike again. These things are important

[John R]

People might be interested to know that I have a single saddle with the small carrier and removable pillion. The only trouble is that the pillion is quite fiddle to fit; my goal is to be able to make a quick swap between carrier and pillion; not there yet.