- Mon Jan 18, 2021 10:53 pm
#94909
Hi i am a building a Bullet and i have to fit a new Bearing tube to the redditch swinging arm ,
My questions are :
1. How much longer should the Bearing tube be than the Swinging arm pivot point , the width pivot point of my redditch Swinging arm is approx 195mm.
2. Also the torque value of the 9/16 spindle nut for the swinging arm spindle.
I cannot find these values in any of my manuals,
Cheers ng
My questions are :
1. How much longer should the Bearing tube be than the Swinging arm pivot point , the width pivot point of my redditch Swinging arm is approx 195mm.
2. Also the torque value of the 9/16 spindle nut for the swinging arm spindle.
I cannot find these values in any of my manuals,
Cheers ng