Forum

[PO51UHD]

Hello All

Rusty, my 350 Superstar is a bit lively in the front end springing department, meaning it's a bit too bouncy and lacking in damping. I'm going to assume I need to change the fork oil (assuming there's some in...!). Am I right in saying I need to undo the big nuts at the bottom of the forks to drain out the old oil? Or is there something more to it?!

Thanks

Stephen

[Gwilly]

Very wise, if its never been checked you may find nothing in one leg and water in the other...

Fit a good spanner to the nut and give a smart tap with a hammer, (weight optional, non metric)

Loosen the nut a few threads and tap upwards to knock the stud up a little into the slider..

This should give clearance for all the oil to drain out...