Forum

[Velominatus]

Hi,
Poss not the correct place to ask but... I've got A.N.OTHER classic which has a 1960's after market drum which requires relining. I'm having issues with getting the brake relined as the company currently undertaking the task are not using the back plate to machine the shoes to size as they said they would do and thus I'm not getting the shoes centred in the back plate and they won't fit the drum. The drum is a Taylor Dow item and required special consideration when new due to the way it was set up.

Does anyone know where I can get the shoes relined and machined using the back plate as a mandrel to get the correct fit in the drum?

Cheers
Velo

[Bullet Whisperer]

If you're stuck and you can get the relining part sorted, I can machine the linings on the brake plate to suit the drum, but ideally I would need the drum / wheel here as well to get the best job done. Just let me know if you think this could be an option. Regards, Paul

[Beezabryan]

You might like to speak with Ian Campbell here - https://www.facebook.com/pages/classic- ... 6241157730

[Scalyback]

Hang on a minute... "Velominatus"?



You sure this A.N.OTHER bike hasn't got pedals? Or you have a 0 horsepower one as well?

[Velominatus]

Cheers Guys,
I'll give the FB chap a try.

And Scalyback, I have a number of Cycles as well...