- Sun Mar 16, 2014 9:18 am
#3389
Simple question (for a change). Which HT lead would you recommend for my (Boyer Micro Digital) 1996 500 Bullet?
What HT leads do i need to use with Boyer Bransden ignition system?
For all our motorcycle ignition systems, copper wire leads with 5000 Ohm suppressed plug cap is our preferred method, although the MK4 systems can be used without any suppression on the H.T. leads if required. When using Suppressed spark plugs, non-supressed caps are recommended. We don't recommend carbon core HT leads because the resistance of the core will vary with the length used and can increase greatly with vibration and age. Although this increasing resistance should not damage an ignition unit, the ignition coil will work at higher voltage and the spark at the plug will become progressively weaker as the core degrades. All Micro Power kits are supplied with copper core HT lead.