Forum

[Norm]

I have a fork leg I can't budge, I have used long bar and a rattle gun but not the slightest inkling of it moving. I have sprayed penetrene in there, it doesn't appear to be rusty. This is on a Super Meteor, any thoughts?

[Phil Ashbrook]

Looks like it's time to get medieval on it with a blow torch and the copper/hide hammer to crack the bond , a respray for the upper yoke would add to the cost I know but you cant let it beat you can you , good luck .

[Norm]

Phil, the purpose for pulling it to bits is to repaint it so that isn't a problem

[Mark M]

Yep, heat and penetrating oil. See my Bullet rebuild article at greenlane.biz for a photo illustration of a well seized 1955 Casquette!
REgards, Mark

[PeteF]

It has been known for people to try winding it the wrong way. Clockwise from the top to slacken.

[Norm]

Got it out, heat helped but most of the problem was caused by some previous paint job inside the headlight shell with paint on the tubes